Bar Ends for 5mm or 1/4-20 Threads

STL files are included for bar ends threaded to accept 5mm (0.8 pitch) or 1/4-20 threaded rod with either right or left-handed threads allowing you to easily make support brackets of various sizes.

Using two of the right-handed bar ends is simpler because you can use readily available pre-threaded rods. If you can cut right-handed handed threads on one end of your bar and left-handed threads on the other you can adjust the tension or length by twisting the bar.

Print Settings

Printer:

D-Bot CoreXY

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

30%