Arduino RAMPS v1.4 Modular Case v2

Similar to the original (v1), but:

• shorter vertically,
• working lid with two fan mounts,
• longer grill on front,
• no more logo on front (Arduino logo on top),
• changed left-side openings to fit 3x 12-pin connectors,
• mounts on side of top (Prusa) instead of top-middle (see photos).

Instructions

1. Print the case, lid, and 2x supports.
2. Mount supports to side of Prusa as shown in pictures. Secure with bolts/washers/zip-ties as needed.
3. Slide case into place on supports.
4. Add connectors and electronics.
5. Add fans to lid.
6. Install lid.
7. Bask in the glory.