Wanted a card-storage box, made a card storage box. there should be +1mm on the standard card size (63mm x 88mm) used for Cards Against Humanity, Magic: The Gathering, Pokemon TCG, and anything else similarly sized.
The box external perimeter is 135mm x 220mm, so ought to fit on most of the common, consumer printers used these days (Dec. 2022). If it doesn't fit on your bed, unlink the XYZ scaling and change the longest length until it does - don't mess with the shortest length or the cards won't fit anymore!
You may need to rotate the STLs by 90 degrees to avoid the purge line.
update: added files for a larger box, 220 x 200mm.
The author marked this model as their own original creation.