E3D Revo nozzle holder

I did not like any of the revo nozzle mounts on the internet, so again i made my own minimalistic version of it. The nozzles are completely covered inside of the print, so there is no danger to accidentally break them and also they are hidden inside of the profile of the alu profile.

You'll need M3x10mm screws and some nuts for profiles. 

The model is ready to print, there is no need to rotate or change orientation for printing.

Taking out the nozzles is done by soft pinching up with thumb, there is big clearance around.

28.1.2023 - Edited/added some chamfers.