Printed in PLA - Alluminium like. At 0,2mm speed profile. Maybe I could had set iron option on.
Looking for a box for transportation, I will be printing the courtyard from v1 soon, a box for the tower and courtyard will be nice. The dragon will stay home, so I might print a top just for him while traveling. (edited)
Model works fine and it is very easy to expand (If needed). I printed one extra middle Part, because kid said it should be higher. Material is pla and 0,3 layers. (edited)
Such a fun model, I modified the courtyard from version 1 of the dice tower to work with this one and fired the dragon off as well from version 1.
Thanks so much for sharing!
@prof_imaginee_377168 can you share the modified courtyard
Printed with eSUN PLA+ White, courtyard added from https://www.printables.com/model/37334-modular-dice-tower, made an adapter for the tower.
Had some warp issues due to cold surroundings, otherwise very nice model, thank you :) (edited)
@bleakraven_721332 Sure, uploaded to my profile now.
I printed this with two middle sections as my kids wanted it to go higher. However, the dice was flying off the table so I created a tray for it based on a model I found on makerworld. You can find the tray here: https://www.printables.com/model/709578-tray-for-a-96mm-diameter-dice-tower
This tower prints great on the Mini. I printed it in ABS and let it sit in acetone vapor for about an hour. It was too pretty for what I wanted though so I roughed it up with a sander and a soldering iron to give it a worn dilapidated look. I notched a 1/2" out of the back to mount it on a dice box. Thanks @SireInsectus this made for a great DND player present.
Magnifico modelo, se imprime muy bien y el resultado es espectacular.
Gracias por tan buen trabajo. (edited)
Printed with mystical green prusament. I added a courtyard. I love this thing. Printed at 175mm/sec with sv06+with klipper screen. .24 layer height. Took about 3 hours per piece. 20% infill.
