Inglis Liberator 1976 Refrigerator Freezer Door Hinge Bracket

This is a hinge bracket for an older Inglis Liberator (made in 1976) refrigerator's freezer door. This older…
1
7
0
138
updated December 19, 2022

Description

PDF

This is a hinge bracket for an older Inglis Liberator (made in 1976) refrigerator's freezer door. This older refrigerator's freezer would have a tendency to have ice build ups which would in turn break the door hinge brackets if it wasn't cleaned regularly. So, this is intended to be a replacement for said hinge bracket.

Make sure the orientation is correct when you go to print it. You may need to mirror it to get the one you want for top or bottom.

I appreciate contributions towards my design work. If you want to contribute, you may do so with the links below.

$2 - http://PayPal.me/Timeshell/2

$5 - http://PayPal.me/Timeshell/5

$10 - http://PayPal.me/Timeshell/10

Print Settings

Supports:

Yes

Infill:

35%

Notes:

I recommend at least 30% infill and 3 perimeters to ensure strength. Support is necessary for the horizontal pin. The horizontal pin may need to be trimmed to fit after printing.

Category: Kitchen & Dining

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License