@ Artillery Sidewinder X4 Plus
Good job!
Thanks a lot.
Raspberry Pi 4 DIN Rail Mount
Mounting Plate for a Raspberry Pi 4 to be mounted on a DIN Rail.
59
886
2
5744
updated June 11, 2020
Makes
Comments
Can you share what standoffs are best to use?
You need M2,5 spacers, length is at least 5mm
What dimensions (M2, M2.5, M3, ...) are required / used for the screw threads of the golden metal spacers to connect the Pi to the printed file? Is there enough space left to put a common cover plate "over" the installed Pi in the electric distribution rack so that in the frontend only the cover plate is visible. EDIT: Comment to myself: This adapter can't be mounted in a fuse box / sub-distribution box, as the main cover to prevent touching of electric components can't be mounted anymore. These are no complaints to the mounting (as not mentioned that a mounting in a fuse box / sub-distribution is possibly). (edited)
Was designed for a 19 inch DIN Rail Rack mount.
