Customizable puzzle of evil

This evil puzzle will keep you busy! And you can write customized text on it to give it away as a gift
3h 50m
1× print file
0.20 mm
0.40 mm
54.00 g
51
240
8
1567
updated December 17, 2022

Description

PDF

This Evil Puzzle will keep you busy for many many hours. Simply place the four puzzle pieces within the available space. There is an easy and a hard option.

Credits & Features

This design is based on hairyfacedhoomans puzzle, where i adjusted some things:

  • Increased wiggle in the hinge to improve opening/closing the clamshell
  • recessed the magnets (two layers or .4mm of “cap” on the magnet so they dont show)
  • changed magnet size to height 2.7mm, diameter 6mm (the ones i had available)
  • added text on both sides of the clamshell design, in case you want to use it as a present

Customization

Use OpenSCAD to change the magnet size and text!

Just put the .scad and the “evil_puzzle_-_no_magnets.stl” file in a folder. Then start OpenSCAD.

Text customization: 

Change the variables:  text1="  Dear Friend,";

Printing

Recessed magnets: 
Make a material change at layer 29, at 5,8mm (when you print with .2mm layer height):

When the printer stops, put in the magnets and fix them with a drop of superglue.

With the two layers the magnets are barely visible:

Tags



Model origin

The author remixed this model.

License


Highlighted models from creator

View more