120mm PC Computer Fan Adapter for 10mm Offset

An adapter to offset a 120mm PC fan by 10mm for case/rad mounting to avoid interfering with ram heatsinks/etc. Designed for a Corsair h100i water cooler which uses #6-32 thread screws, which seems to be a common PC screw thread. Counterbored holes fit small length screws to mount to rad, and the smaller holes can be tapped (#6-32 thread) or self tapped with the included long Corsair screws for the fan.

Print Settings

Printer Brand:

Monoprice

Printer:

Maker Select

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

20%

Filament: Generic ABS Black

Notes:

Print with brim to keep part adhered to bed and prevent curling. Printed in ABS to resist higher temperatures mounted directly to the rad. Other high temperature materials could work.