PTFE Plug and filament holder

Printed with Amazon Basic TPU on Prusa MK4S, HF0.4 nozzle, 0.20, 'SPEED', Prusa 'Generic Flex'.
A brim of 2.5mm was needed to print 22 pieces at a time AND scaling the original file to 90% on x and y to become a good fit for the 4mm tube and at the same time the filament too.
I'm very pleased and send VK4IU a big thank!
BTW: I merged the cap with CatwithDuckHats -thank you too!- 'keeper' (100%) and named the result: "Cap VK4IU90" (see picture). Former trials were 95 and 92% and finally I ended with 90%: hence part of the name. (edited)

Awesome little model that was just the finishing touch on my Dryboxes. Quick Print and does exactly what it says.
Thanks

It's alittle loose on the ptfe tubing

I'm so glad I searched Printables before designing a filament grabber. This design works perfectly for holding the inactive filaments from my RepBox to my Prusa Enclosure! Thank you @VK4IU!

fits nice for me a little bit of tug on the end that lets you know it's fully seated. printed with .4 nozzle in pla with .2 layer height.

Works great. Thanks!

Thank you. Fit my need.