I've been had...
My fault.
I had 3 empty slots left in my LEGRAND box.
I thought when I saw the photo that this adaptor made 3 din.... slots but 3 din slots are +-53.4mm and the adaptor is +-58mm... So unable to fit in my box :/
Apart from that, good design, but it would be useful to add the dimensions to the description and mention that it is just over 3 slots.
Rgds.
Renba (edited)
Hello, thank you for your feedback. I reduced the width to 53.25mm - check out the "narrow" model. It doesn't look very good, but the M3 nuts should still hold it in place.
Perfect fit !
Nuts are well secured too.
Thanks for the update worthy of a great designer ;)
Following the IEC 60715 standard, the right with is 18mm wide, 3 slots = 54mm
https://en.wikipedia.org/wiki/DIN_rail
I´ve adjusted the width for several PCB and fixed it with small self tapping screws.
Thanks for the design.
Soo Perfect !
I Was Wondering if you still have a fusion 360 files for this.
I have another board to fit on you marvellous idea!
Here we go @KaosuNeko
And Here The Link to GitHub Electronic open Source board if you Have Application Eagle or Something else https://codeload.github.com/SuperHouse/IORJ45/zip/refs/heads/master (edited)
