Step Switch Cap (Remix)

Adafruit Step Switch with working center tong. This is a working model for 3D printing not the cosmetic one for PCB's.
33m
1× print file
0.12 mm
0.40 mm
1.00 g
Creality Ender 3 Pro
0
14
0
287
updated January 4, 2023

Description

PDF

Mechanically intricate keycap improved Adafruit Step Switch. Included in the attached images is the old vs new intricate model. 

You can view/purchase the switches from Adafruit's store here: https://www.adafruit.com/product/5499

PETG required. The center tong in PLA is too soft and will not trigger the switch! The switch trigger distance is the difference of 0.5mm, it's an EXTREMELY precise mechanism. The smallest layer height (best quality) you can print is highly recommended due to switch mechanism tolerance.

The precision of the center tong and pin holes on the legs are the most important aspects of the entire print.

Creality Ender 3 S1 Pro Settings:

25mm speed, 3mm retraction, 40mm sec retraction speed, triangle infill.

250C nozzle temp / 80C bed temp / 20% fan after layer 4.

Cylinder supports on small legs and center switch tong.

Tags



Model origin

The author remixed this model.

License