Intex Ultra XTR Frame leg bracket

I needed a bracket to hold some of my pool stuff to the frame and this is what I came up with.
I also have the holder for the valves for the pump and such too.

It needs to be printed in PETG, ABS, or ASA (for UV protection)
I tested PLA and it got weak and warped in the sun.

It uses a 2.5" long 1/4" bolt and nut, I recommend a Stainless steel one. If you use stainless steel bolts please use anti seize on the bolts

You can also attach a 1.5" PVC pipe to the bracket and it it for the pool nets and etc if you want.

Print instructions

No need for rafts or support material.
I would recommend printing it with at least 3 on the perimeter.
and it works with the 0.6mm nozzle as well as 0.35 layer height if you want.