Heat-set Insert Press

Do you need a way to install heat-set inserts straight. Then look no further.
25
116
1
1886
updated December 12, 2022

Description

PDF

Are you looking for a way to get your threaded brass inserts installed straight? Look no further. This design has many features. It uses a temperature controlled soldering iron found on Amazon for only $18.99usd (as of 2/2022). The Press has a place for eight Heat-Set installation tips. It slides up and down a 400mm long 20x20 aluminum extrusion. It uses a weight to counteract the weight of the sliding structure. There is a convenient handle to move the Iron up and down for either left or right handed use. I have included a test piece for calibrating your print so that the parts fit perfect. I used lead shot to fill the counter weight (9oz or 255g) . I have included a file for a funnel to fill the counter weight. The Roller_Cap_2 is already supported as well. Just drop it into your slicer with supports off and print. There
is a B.O.M., Parts List & Assembly Instructions included. All files are in the zip file.

Tags



Model origin

The author hasn't provided the model origin yet.

License