I have not seen anyone ever create an Ant Man Helmet with Glowing Light Bars inside the antenna. So, I made them myself! I have received many compliments on Halloween and wanted to share my design with the community rather than for profit. Please Message me if you have questions.
PARTS to 3-D PRINT: 6 STL Files located in the Print Files category below.
MATERIAL: PLA- Print using “Clear” or “Translucent” Filament.
Amazon Filament Link (non affiliate):
PRINT NSTRUCTIONS:
BUILD NSTRUCTIONS:
Insert the LED strip into the antennas and feed though the helmet. I used a 5 Volt LED strip, cut the strip to the desired lengths and soldered any connections to the leds to connect them. I then connected the strips to the power supply which uses a 5volt to 12 volt step up converter.
I used a LED strip from Amazon: Amazon.com: Kohree 20FT RV Awning Led Light Kit, RGB Dimmable Waterproof 12V Strip Exterior Lighting with APP/Remote Control, for Party Camper Motorhome Travel Trailer (White & Multi-Color) : Automotive
I used a Voltage Converter from Amazon: Amazon.com: DC 5V to DC 12V USB Voltage Step Up Converter Cable, Power Supply Adapter Cable with DC Jack 5.5 x 2.5mm or 5.5 x 2.1mm, USB 5V to DC 12V Cable - 5ft : Electronics
I used a Battery Pack from Amazon: 5V 2A Rechargeable Battery for Heated Vest Heated Jackets Heated Hoodies 10000mAh Battery Pack for Men Women (No DC port, Not suit for 7.4v Heated Clothing) at Amazon Men’s Clothing store
Support my Pro Bono Work: Daniel (buymeacoffee.com)
OTHER:
Images is Photo Section also show some print settings which highlight that 0 bottom layers are used for the prints. It also shows how the LED strip can be cut to desired length.
The author hasn't provided the model origin yet.