A must-have for the Canon-enthusiast!
In the contest LED Diffusers
68
142
4
1518
updated January 21, 2023

Description

PDF

A must-have for the Canon-enthusiast! 

I designed this sign to bring some life to my camera shelf, and i succeeded!

It is designed to fit firmly togheter without glue, however you might want to glue some parts depending on your printers tolerances, (I ended up having to glue the logo on to the top)

I printed the logo with clear PLA but i think it would be just as good, or better to print it with a solid white filament.

All you need is a led strip, preferably with atleast 60 LEDs/m

Parts needed

  • 1x Sign Base
  • 1x Top
  • 1x Canon Logo
  • 1x A Middle Part
  • 1x O Middle Part
  • 2x Plug Half
  • About 0.5m LED strip

Assembly

  1. Push in the middle parts into the A and O 
  2. Push in the logo from the back of the top part, (glue if necessary) Make sure that the marks on the back of the O and the top is aligned with eachother to get the correct placement
  3. Test fit the plugs in the hole in the back side of the base, (file down any edges if necessary)
  4. Install the led strip along the inside wall of the base, leave the connector side near the hole
  5. Push in the Led strip connector through the hole and connect it to the strip
  6. Push in 1 of the plugs, align the cable with the middle hole of the plug, push in the other plug to secure it

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more