Does not properly fit on my hatchbox spool. Clever design, but unfortunately the vertical dimensions do not allow for proper insertion into my spool. I ended up printing 3 at once only to find out that the design is too big for the spool I have in hand. The spool I have is identical to the one shown (other than color). I can force them in, but unfortunately, that snapped off the hinge.
Would be good to allow for a variation that has heat set inserts for a more rugged hinge option
Filament spool storage cubbies
Repurpose your empty spools with these modular storage cubbies.
75
250
0
1767
updated December 31, 2024
Makes
Comments
@NJKirchner_91550 Sorry to hear it doesn’t fit! Can you measure the space between the spool sides so that I can check that my design is correct?
I found that if I gently bend the spool side upward, it let me move the cubbies in without snapping off the hinge pin. (edited)
for esun drawer you only upload one side i believe is missing the right side (edited)
@Raidy_980179 Just mirror the file in your slicer