Patrock Star (The Rock + Patrock)

Just a fun mashup I slung together.  No supports needed. Remixed from these two files:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson
https://www.thingiverse.com/thing:3680027

**This design is uploaded with a non-commercial license. If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://www.patreon.com/thinair3D

Printing Info:

FDM or Resin: FDM or resin
Scaling: Current Size: 64 x 77 x 110. Scale up or down as you please!
Supports: No supports needed
Nozzle Size I Used: 0.4
Infill/Perimeters: 15% with 2 perimeters
Layer Height: I used 0.20, but any layer height should be fine.