Just a fun mashup I slung together. Supports are needed for this model. I created the Plankton myself, then remixed it with this file.
If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://www.patreon.com/thinair3D
Printing Info:
FDM or Resin: FDM or resin
Scaling: Current Size: 48 x 38 x 96. Scale up or down as you please!
Supports: Supports needed for the antennae only. (miiiiiight be able to get away without them, but not a bad idea to use them)
Nozzle Size I Used: 0.4
Infill/Perimeters: 15% with 2 perimeters
Layer Height: I used 0.20, but any layer height should be fine.
The author remixed this model.