I wanted to mount the Euclid probe on my Eva 3.0 tool head without compromising the form factor and keeping it compact. I figured mounting it under the shroud may be a good way of doing so and used the tank shroud. I haven't set up docking yet as I'm still building the system, but the mount seems good.
I initially remixed the tank shroud to have a Euclid mount underneath, but I can't get that to print well with my setup. I then started over and made a more compact shroud (as it doesn't need to hide any probes behind it) and another minimal fan-plate. All the Euclid mounts are the same between and should mount without little to no offset with the nozzle on the x axis.
Design was based around the Revo Voron hotend and may need to be reworked for anything high flow.
I also included a dock and mount for a 2020 extrusion in front of the toolhead. I am using the VZBot gantry and the dock works well with it for now. I will most likely work out a servo-based solution to deploy to the dock rather than letting it sit where it may interfere with a print.
The author remixed this model.