Tiny Micro SD Card Holder

Weighing in at 7g of filament and holding three micro SD cards, this little case is easily portable and very convenient to have on hand. The micro SD cards fit snuggly and the threads are buttery smooth (for me at least, your mileage may vary.) It's excellent for temporarily storing those SD cards that you just don't need quite yet, but definitely don't want to lose. I made 2 different modifications to this model. Change one was to remove the keychain part as I found that it had no value (for me) and made the part harder to print. Change two was removing some sort of weird integrated logo. Under normal circumstances, I wouldn't care about logos but this one didn't show on the print. It just hollowed out part of the print and made for some bad-looking bridge infill. 

Here are my settings 

Printer: Anycubic Kobra

Material: Mattherhackers build series red

Perimeters: 3

Infill: 100%

Supports/Raft: No

Brim: Yes

If you make this model I'd love to see your makes so please post and leave a comment! Thank you and happy printing! :)