Stand for Raspberry Pi Zero

Stand for Raspberry Pi Zero with spacers and holes for cables, so they are directed to the rear
8
36
0
302
updated December 8, 2022

Description

PDF

Stand for Raspberry Pi Zero with spacers and holes for cables, so they are directed to the rear. You have to use the Spacers, because the USB- and HDMI-cable ist too thick for mount the Pi directly to the stand.

You will need 4 bolts M2,5x16 and 4 nuts M2,5. You can use M3 too, but than you have to drill out the holes in the Pi-board.

I suggest to print the stand turned to side.

Tags



Model origin

The author marked this model as their own original creation.

License