Spider Chuck for lathe

Update_20220512

I made another version REV_A, where you can adjust the measure by small spacers tightened on spider chuck, in this way you can avoid to print all the spider chucks.

Pay attention because you have to print the parts and to drown a M3 nuts on the spacers and on spider chuck.

In any case the old version remains available.

Regards

Jonweb

Hello,

just another tool chuck magnetic spider for my 100 mm lathe, i attached .stl with different height 10-12,5 15 mm.

It is a tools in order to help the lathe worker to lock small spieces on chuck, the parts will be in contact on the spider centre and help you to align it, In addition if you are more parts to machine is very suitable. The tool is locked inside the jaws and by three magnetic cub of 8 mm is positioned on chuck surface.

The tool chuck magnetic spider is suitable on common 100 mm auto centre chuck, the chuck jaws tickness is 15mm i addes 0,1 mm of gap.

If you wants other mesure please ask me

Regards

Jonweb

Print Settings

Resolution:

0,2

Infill:

65%

Filament: not important PLA/PETG not important