Simple Model Rocket Fin

This is a simple fin for model rockets that I created in FreeCAD. I just had an old rocket that the balsa wood fins had broken on and I wanted to fix it up and get it back out to fly. Super simple.

Print Settings

Printer:

Anet A8

Rafts:

No

Supports:

No

Resolution:

.3

Infill:

100

Notes:

I printed these flat against the bed. I printed these solid but you can play around and try some infil. I set them at 2mm and that seemed pretty good for the size. You may try scaling them down in the z direction if you want them not so thick.