This model will need supports. I printed it vertically with supports just on the bottom to hold the model up.
Remixed from:
https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:2360230
If you would like to support my work or have access to ALL of my files you can consider joining my Patreon: https://www.patreon.com/thinair3D
FDM or Resin: FDM or resin
Scaling: Current Size: 65 x 74 x 196. Scale up or down as you please!
Supports: At the base to hold him up!
Nozzle Size I Used: 0.4
Infill/Perimeters: 15% with 2 perimeters
Layer Height: I used 0.20, but any layer height should be fine.
The author remixed this model.