KlipperScreen - Floating Case for BTT TFT50 and Raspberry Pi 3 or Rasppberry Pi 4

The original project was “watering". My remix eliminated these flaws. Made, as per the original project with 25% infill. 

All merits go to the original project of dalpek @ https://www.thingiverse.com/dalpek/designs who is the original author of this design.

I made mine in eSun PLA+ 220C and 60C, Klipper powered @100mm/s but don't try this speed if you are Marlin powered. My printer is an Endder 3 S1 and Sprite extrusor