Ratrig Vcore3 Enclosure 2.0 modded Magnet Holder

enclosed magnet that must be inserted during the print
13
46
0
548
updated December 3, 2022

Description

PDF

I used the original step files from Ratrig to create this mod. It was hard to get the magnets into the stock magnet mounts for all front / top panels.

So I decided to make them “enclosed” to the printed files.

I printed the parts with 0.2mm layer height and 0.2mm first layer. That needs the pause command during the print on layer 27 (magnet_mount) or layer 29 (magnet_holder). Insert the magnets (10x4mm) and resume the print (keep in mind to prime your nozzle a bit during the pause, depends on your settings).

The 2 3mf files are saved projects from my SuperSlicer.

Feel free to adjust the files as you need, fusion and step available :)

Tags



Model origin

The author hasn't provided the model origin yet.

License