SBox for MINI - Cantilever box

nice

Great box overall, if only the hinge is compatible with an m3 bolt, It's not a hard fix either, will remix later on.

Had issues with the hinges breaking from the metal dowels during opening/closing of the box. However after replacing the hinges with 2.85mm filament it works great

Looks awesome.The problem its i cant completly close itt.something on the cantilever prevents itt.Did someone has some similar problems?

Un gran trabajo, me encanta.

Excellent design! Everything workes as it should. Thank you for sharing!

Awsome print, very easy to assemble.
Keep up the good work

For my small hand tool
1.Full PETG print for better strength
2.Designed my own insert TPU to fit the screw driver set

I travel quite a bit back and forth with my printer and typically I just throw all my little tools and stuff into a zip lock or a zippered bag. This little box will make it much easier to keep those little items organized and accessible. I didn't have a metal hinge so i opted to use a piece of ASA and melted the ends into a flat head. Also didn't have any more M3 bolts that were long enough so I found some nails and hammered them in with a nice tight fit. Printed in PETG Prusament galaxy black and hatchbox petg copper. Turned out very nice, thanks!

Very cool
The heads of my screws seemed a bit to large so the box doesnt close fully on its own

Loved making this box, and super useful for my drill bits and other tools! Went together easily.