Pokeball Case for Mi True Wireless Earphones 2 Basic

Easy to print pokeball case. Print at 0.2 layer height and use 3 perimetres for extra strength.

Traditionally, the top cover should be red, the base white with a colour change to black, the bigger circle black and the smaller one white. Personally, I liked the colour ratios when the top 5 mm of the base are black but you can play around in tinkercad and find out what you prefer. 

Unfortunately, due to the curvature of the case itself, the top cover cannot be friction fitted so it must be glued instead (I used simple instant glue). As a result, I also glued the base but someone can tweak the tolerances on the step files if they want to try to have a friction fit.