Prusa Mini Dual Drive Extruder Revision 6 - modified bottom part

Slight modification of the bottom part for better fit and ease of use.
13
42
1
580
updated November 26, 2022

Description

PDF

I have printed the oryginal v6 version of the extruder by Infantryman. It worked properly, but the mount was a bit flimsy (the whole body was moving back and forth a bit) and I did not like the tension screw being on the bottom with not very easy access. I have filled up the space designed for the spring and instead added a cut for a square nut. Now the tension spring and screw can be installed on the top cover with easy access. But you will need M3x45 screw (maybe even a bit longer if you want really light tension). I have also made the mounting screws cut-outs 1mm shallower to give those screws a touch more grip and stability. Fits nice now and can be adjusted on the fly.

Tags



Model origin

The author remixed this model.

Prusa Mini Dual Drive Extruder Revision 6
by Infantryman
Original model was switched to draft or deleted

License