Where do I find the bins? I only see the box and the lids … thx
Gridbox
A remix of the parametric rugged box and gridfinity. 6x6, 5x5 and 4x4 version. Added the step files so others can tinker
194
792
6
6388
updated December 27, 2023
Makes
Comments
Does the lid on the has hany gap between it an the containers? If you dropped it would all the contents mix up?
@KeithC_1528151 @bilboDD_119010 I am also wondering about that ! what is the maximum height of the gridfinity bins, how to make the box part deeper, how to be sure the bits and pieces don't mix if I flip and shake the box ?
Great model.
The bottom hinge screws broke the hinge holes on my first try. Not sure why. The second side of both hinges. I'm printing it again and I'll heat up the bolts before screwing them in. I hope this will fix it. Do you suggest any other ideas to prevent the
@DouglasColman_237309 Maybe your holes are printed to tight, or the layer adhesion of your print is not ideal. How to solve depends on your material and slicer settings.
Added the step file so others can make variations, remove faults, resize....
Is there only a full height Version?
Is there a possibility for a parametric lid?
So I (and other) could use different bin heights or even already printed bins.
Or upload a step or openscad file, when this is easier for you.
@bilboDD_119010 Thank you!
love the design!
Would you be able to make a 5x4? thanks!
Are supports needed for the hinge area/the holes for the bolts?
Great model! Took a couple of tries with the bottom. I had some trouble with warping. But finally I got it. Just need to cut the window and buy some longer screws.
Hello, in the 4x4 the 4x4 latch.3mf and 4x4 seal.3mf is missing. Can i use the latch from the other and do i need the seal, if i wanna print the 4x4 version with a window?
@Ben_248894 the latch is the same as the other models, i will upload the seal today. you can use the box just fine without the seal!