I create a "Portable" version with a 2500mAh LiPo Battery for cordless use.
I add 2 Versions one with USB Port for external loading and power and one without it (case is easy to open for loading)
the Cordless Version is Snugfit, the USB cable needs a bit more room so i must taped the case for better hold XD
I'm new in the 3D World and im a Fusion360 Noob. I attach the original Files. Feel free to Edit and Remix it to make it better..... maybe with as snap in design or screws.... whatever.... for better hold u know... Remix it and let me know ;)
Parts that i use:
128 x 64 Pixel 0,96 Zoll OLED I2C Display: https://amzn.to/32CfJej
D1 Mini - ESP8266: https://amzn.to/30EgxgO
Battery Shield for D1: https://amzn.to/2Y8MW1j
Micro USB Port: https://amzn.to/2XLD26q
13x8mm SPST On / Off-Snap-in Switch: https://amzn.to/2XSz2RN
Lithium-Polymer Battery 3,7V 2500mAh with 2 Pin JST: https://www.berrybase.de/strom/batterien-akkus/industrieakkus/lp-785060-lithium-polymer/lipo-akku-3-7v-2500mah-mit-2-pin-jst-stecker
EDIT: Here the Arduino Sketches i used.
The Original (with Instructions how to compile and wich Libs u need ) https://github.com/Qrome/printer-monitor
And here my changed and to german translated Fork (still WIP) https://github.com/NeoRame/Printer-Monitor_DE
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0,3
Infill:
15%
Filament: Zaper PLA Silk bronze
Post-Printing =============
Switch and USB States:
Switch off with USB Plug: Monitor work with external Power (Blue LED)
Switch on without USB Plug: Monitor work with Battery
Switch on with USB Plug: Monitor work with Battery and the Battery load (Red LED) if the Battery is full the light turns Blue (only when the cable ist plugged)
Category: Electronics
The author remixed this model.