I wanted to connect the magnetic connector (https://www.printables.com/model/32368-join-ptfe-tubes-together-magnetically) to the passthrough of a drybox (https://www.printables.com/model/80802-dry-box-filament-pass-through), but i had to go
passthrough → PTFE connector → PTFE tube → PTFE connector → magnet connector
which i didn't like, as it was quite long, unstable and unnecessary expensive with 2 connectors.
Merging the magnet connector with the passthrough connector was also not the best solution for me, because it solved the problem only for me and my specific magnet connector.
So i created this hollow M10 connector, with which you can connect the passthrough and the magnet connector together directly (and everything else, that connects to a M10 connector).
Print settings:
Material: PLA
Nozzle diameter: 0.4mm
Layer height: 0.2mm
Supports: Not needed
If you have any issues with screwing it in, print the model at a smaller scale in x and y direction. 95% has worked well for me so far.
The author remixed this model.