Give one of these to each of your humbug friends during the holiday season.
If you don't want the loop on top, you can make it like a card. In Fusion, roll the history time line back between the 2 groups. The first group makes the main card; the second group adds the badge loop.
Design
This was an exercise in designing with an SVG file in Fusion 360. Steps:
- Start with a picture (JPG) either drawn or downloaded.
- Drop the JPG on the JPG to SVG converter site
- https://convertio.co/jpg-svg
- Download the resulting SVG file
- Open it in your browser to ensure it has good, solid, clean lines
- Repeat conversion until you gave a good SVG
This next part may take a little practice...
- In Fusion 360, Design mode > Insert > Insert SVG
- If you don't already have a sketch started, the insert will create the sketch
- This next part is critical...
- The SVG will appear as an outline drawing; the origin center will be shown for reference; and you will see move and size handles. It is very important that you get the size, position, and orientation correct before you hit enter (on the Insert action). If you are off even a little bit, there is no tweaking the Insert action - it is now part of the sketch and the best you can do is Undo and repeat the Insert all over again.
Tags
The author marked this model as their own original creation.