Mary Poppins Stencil
Scale the Stl freely in the slicer.
20 mm/s (or less) for the first layer.
No raft or supports.
39
130
1
669
updated November 25, 2022
Description
PDFScale the Stl freely in the slicer.
20 mm/s (or less) for the first layer.
No raft or supports.
Print Settings
Printer:
Flsun Super Racer
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament:
Eryone PLAMulticolor
Category: 3D PrintersTags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
