Flex Ring Gauge Offset direct mount for Simucube and other DD

More info on the discord: https://discord.gg/EBbzWWyGgr 

Another solution for mounting the Flex Ring Gauge directly to a Direct Drive mount such as the Simucube, or the VRS/MIGE/OSW motor ones.

Requires M8x12 for the meter and the existing M8s for the motor side.

The provided STLs reference an “offset”, see drawing for where this offset is measured from and download the most appropriate one for your setup.

If it wobbles for your setup, try printing it thicker and using longer bolts. 

When printing, use at least 7 perimeters.. 20% infill should be ok.

Update - 2023-03-24
- Included a remix of the original design that can be mounted lower, using a thicker mount on the meter side to accommodate the whole bolt head.