Nice print works well
Bambu AMS Buffer Hub Remove Button
this works on the AMS Hub and the AMS Buffer
118
573
11
3900
updated March 12, 2023
Makes
Comments
My old version for the buffer was too big for the hub. Found 3 models that seem to do the same. This was my first try and it works perfect. Thank you for sharing.
0.20 in PLA+ scaled to 103% as was too tight. Not sure why the STL needs to import with the tubing attached, had to split the model to print. (edited)
Printed in ASA, but the full circle ones were too tight, possibly due to ASA shrinkage. I drilled them out to 4.5mm and they work fine. Thanks
It keep shoeing a purge tower even though only one material is selected. Worse, I can't print in ABS because it say incompatible materials.
@SR22pilot_444176 this is a BambStudio slicer bug, when you hit print it only shows one, if you want to abs right click on the negative parts and "Change Type" to Part, then tell it abs then "Change Type" as a negative part again, another BambuStudio bug
I'm not sure what the problem is, but the .3mf file is unprintable in Bambu Slicer. Can you just post the stl or step files instead?
View one more comment
@Ixian_67258 Uploaded, instructions to convert it now in the description
@TheTexMech Thanks!