Lid handle - Replacement handle for a pot lid

A simple replacement handle for a pot lid. Model after the original (not identical though). It assemble with the original M4x12mm screw. It's a good idea to pre-tap the hole with another M4x10mm screw, with an hex head for more torque, then use some lock-tight type glue on the original screw before final assembly.

Printing:

• Material: ASA for better heat resistance
• 100% infill
• Support needed for the center hub, as it is 2mm away from the build plate. Be careful not to put support inside the screw hole !

Files:

• STL exported with fine details
• 3MF for PrusaSlicer2.5, set for 0.15mm layers, with adaptive layer height and supports on the center hub.

More info:

• Modeled with onshape.com, publicly available here: impulse1delta/Lid-handle | oinshape.com