Poison Printhead V3 TwoTrees Sapphire Plus/Pro

V4 is out! https://cults3d.com/en/3d-model/tool/poison-printhead-v4-twotrees-sapphire-plus-pro
24
129
0
1353
updated March 15, 2023

Description

PDF

 

V4 of the printhead is out!

https://www.printables.com/model/418000-poison-printhead-v4-twotrees-sapphire-pluspro

 

update log:
06-12-2022: small change to the cooling duct because it was a little too close to the hotend.


This is the Version 3 of my own design, the Poison printhead. It's designed for the TwoTrees Sapphire Plus, but I think that it will fit on the pro too. It's designed with a dragon-hotend, Orbiter extruder, 5015 fan, 40mm fan, bltouch, accelerometer and belt tentioner!

i made some changes on the printhead itself, and relocated the bltouch. i also completely remade the cooling ducting.

I've got it running like this, and it works great. I've always used PETG, but this will melt a little (doesn't impact performance from what I've seen). ATM I'm using ASA, and this won't melt.

.step file is included, so feel free to mod/improve it!

needed:
2 nuts M4
2 nuts M3
2 nuts M2
2 screw M4x20mm, or M4x16mm, or M4x12mm
8 screw M3x8mm.
2 screws M3x20
2 screws M3x4
2 scews M3x12
2 screws M3x5
some screws from the old hotend assembly
screws that came with the dragon hotend
2x screws M2x6 (or longer)

consider donating me to keep the work up! this took a lot of time to make.

 

Model origin

The author remixed this model.

Sapphire Pro Belt Tensioner
by jaaanik (thingiverse.com)

License