I used Cookiecad 'Unicorn Elixer' PLA for this instead of white. My girlfriend is very pleased.
I didn't have any issues with the tie like others, though I could probably use better quality black filament.

I used Cookiecad 'Unicorn Elixer' PLA for this instead of white. My girlfriend is very pleased.
I didn't have any issues with the tie like others, though I could probably use better quality black filament.
Solid model! I had some trial and error pausing at the correct layer. In my slicer I was one layer off.
The slicer also messed up Doodlebob’s tie. I didn’t notice until it was too late.
Printed with PLA
First layer height: .2mm
Layer height: .2mm
3 walls and gyroid infill @ 15%
Pause on layer 43 swap to black
Pause on layer 49 swap to white
Pause on layer 65 swap to black (edited)
https://x.com/groovyblunt/status/1720927591425872080
this is not a commercial license correct? people out there taking credit and selling them...
Printed with white filament and used a black paint marker for the accents.
The two models harmonize wonderfully. They were easy to print, with only three filament changes each. I used Bambulab white and black. I highly recommend these models.
Things have…. Taken a turn for the worst with Mr. Doodle Bob. “Trust me with the exact-o knife” he says… “It will be fun” he says…
Love it! Can't wait to try it!