EBB36 Mount with Cable Strain Relief for the Orbiter v2.0

Printed a couple in different abs. Fits great.

The mount works great. The zip ties holes are just a little too tight

Printed this once, dropped the toolhead, and printed it again haha.

Used PETG Fiberlogy

Just finished installing and wiring up my EBB with this mount printed in ABS. Everything came together perfectly.

Thanks for sharing!

Made some changes to make it work with a USB cable

Thank you, works great! The Voron logo is a nice touch. I still need to clean up my wiring but this made it really easy to attach the EBB36 to the Orbiter 2.0.

Thank you

printed on the prusa mini, i was looking for something that would mount on the orbiter and a CAN board, I mounted the SHT36 v2, so I need to mod it a little bit for the larger connector, but otherwise its nice and simple

whats the difference between OS2 ans O2 extruders?

Hey djos_1475,

I like your design very much, but I have the problem that the plug doesn't fit into the EBB36 because the cable holder is too close to the board. Is it possible to get an additional version that has a little more play between the cable holder and the connector on the board?

Best regards