- Made to work with the base and spring components from 3D Printy
PRINTING INSTRUCTIONS:
- MATERIAL : PLA
- NOZZLE SIZE : 0.4 mm
- LAYER HEIGHT: 0.2 mm
- VERTICAL SHELLS: 2
- INFILL: 5%
If you want to use the small spring I recommend using an infill not exceeding 5% while if you use the large spring you can use an infill of 15/20%
- it should be printed with supports (35 in supports settings is enought)
![](https://media.printables.com/media/prints/316541/rich_content/8604abb7-51dd-440b-a62a-f1909ef80f19/thumbs/cover/800x338/png/immagine-2022-11-13-170546.webp)
Tags
The author remixed this model.