SKR 1.3 Ender-3 Case | One side | 2 fans

SKR 1.3 Ender-3 Case | One side drawer | 2 fans

I wanted smallest possible case and I am not using Raspi so these double drawer designs were overkill.

You will need:

• 4 x M5 bolts (you should have at least 2 from Ender)
• 3 x M3x20 bolts for the lid
• 8 x M3x20 bolts for the fans
• 4 x M3x10 bolts for the SKR board
• 4-12 x M3 nuts for board height adjustment
• 1 x 12/24v to 5v step-down module
• 2 x 4010 fan

Notes

USB and SD holes may require little drilling.

Fans are directly above the drivers, I've never encountered overheating.

Cable management may be difficult but I've used all available space for this one side design.