This is an insert for the board game “Tainted Grail - The Fall of Avalon”. It is a remix based on the excellent insert by @Sacapuces (https://www.printables.com/model/211725-tainted-grail-insert-base-box).
I changed the wall thickness to 2 mm, which prints exactly as 4 perimeters without infill using a 0.4 mm nozzle. The bottom thickness has been changed to 1.4 mm, which is either 7 layers when printing with 0.2 mm layer thickness or 5 layers with 0.3 mm layer thickness (because the first layer in PrusaSlicer is still 0.2 mm).
With these changes, the amount of filament for the whole insert shrinks from 1.36 kg to 1.05 kg (-23%) and the printing time reduces from 60h26 down to 44h09.
The author remixed this model.