DJI RC Lanyard Mount

Mount for the DJI RC (e.g. for the DJI Mini 3 Pro) to snap in a double lanyard. Easy to print, with access to USB-C port
13
110
2
634
updated November 13, 2022

Description

PDF

Mount for the DJI RC (e.g. for the DJI Mini 3 Pro) to snap in a double lanyard. Access to the USB C (charging) port is possible. To access the other ports (i.e. SD card) the mount would need to be removed, but this is possible within less than a minute. It's designed to be installed with the rounded corners facing front.

You can install the mount with regular M4x10 screws or alternatively print the M4 screw knobs model to install/remove it without the need for any tools.

I would recommend to print the screw knobs with your finer settings and only use thouse if for printer is tuned enough to get a good working thread (as it might break otherwise). In case of the mount you can choose yourself the resolution as it should work anyway, just impacting the (clean) look.

No support should be needed and can be print in the provided orientation.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3v2

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

 

 

Category: R/C Vehicles

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License