This is the Mrk1 of the Front Battery Cover clip for the Harley Davidson Sportster 05 and later.
Also Check out the slimmer and tougher version Mrk1.8.
Note: *in some cases you may need to Print the dedicated Pin 1.
*When in slicer rotate the model to place on face like the photos to reduce the amount of supports need it to print.
*make sure to smooth out and clean well every stitches and none-smooth areas of the models holes and the pins surface (I recommend to sand them down as less as possible)
Material : PETG
Printer: Zortrax M300 Plus
Nozzle: 0.4mm
Resolution : 0.15
Infill: 100%
Supports: On
The author marked this model as their own original creation.