A mount for a Microsoft Lifecam Show webcam to attach to 20mm aluminium T slot or V slot extrusion. This may be useful for monitoring 3D prints using Octoprint.
I designed this with Onshape. The model is publicly available at https://cad.onshape.com/documents/6eaecdb241af2f3e89c4ec30/w/21a3128c618f9f134d0c8807/e/31c2b40d417cf2556a401667
Printer:
Makerfarm Pegasus 10"
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
40% honeycomb
Notes:
I printed with supports with the Y shaped face down and had some trouble removing supports for the hold for the USB cable. You should be able to print without supports in this orientation as bridging areas are not too long.
Printing upside down, with the aluminium mount hole at the top should also be possible, but will take longer.
The author marked this model as their own original creation. Imported from Thingiverse.