{"data":{"model":{"id":"315212","slug":"esp01-programmerbreakout","name":"ESP01 programmer/breakout","authorship":"author","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"0E-10","myRating":null,"ratingCount":0,"description":"

This is an enclosure for an ESP01 programmer by AzDelivery (and similar, see picture).

Additionaly it is a breakout board for the pins and adds buttons for easy usage.

I decided to upload my ESP01 programmer, because it is so handy and neat \u2026 but unfortnatly I have no time to draw nice schematics. I added photos of the board form different views so you shoud be able to figure out how to solder. (ask if neccessary)
The PCB I uses is a 2x8cm board that come in a set you get from A\u2026 (the buttons are also available there in a set)

To connect the programmer to the PCB you have to sligthly(!) remove the solder of the 2x4 pin block with a solder sucker. Then put the programmer in the desired spot on the PCB and then you can solder your wires to it.

The resistors a for a voltage devider to support 5V on Rx serial pin. This is not ideal, but it worked. This part is definetly not neccessary, but sometimes handy\u2026

Please excuse the bad print quality. This is an very old print from my first printer on his last days with bad filament. I didn't reprint this, because it does its job and yeah saving plastics is always a nice idea.

needed parts

ESP01 programmer (e.g. from AzDelivery, see photos)
PCB 20x80mm
3x 1k resistor (or 1x 1k and 1x2k)
3x buttons with minimum 6mm shaft
some wires

print instructions

no special print instructions

assembly

assemble the electronics
take the base part and slide board with USB plug first through the hole like seen in the picture
the pcb should fit snug tight. (if you want to pull it out use pliers)
place lid on top
use marker to mark function of buttons (R=reset 0=button gpio 2=button gpio2)

usage

place ESP01 module onto the programmer. The board must face in USB plug direction, see photo
connect it to your computer
start your programming software (arduino IDE, esptool, \u2026)
press button 0 and R at the same time
release R, but hold 0
when uploading begins you can relase the 0 button

additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.

","category":{"id":"52","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","description":"Are you a maker? Everyone is, be a printer. Upgrade your home workshop and combine different materials and methods of crafting including 3D printing.","__typename":"CategoryType"},{"id":"52","name":"Electronics","nameEn":"Electronics","description":"Keen on electronics devices and making your own gadgets? Use Raspberry Pi, Arduino, or GoPro and create new equipment using 3D print. Let's start!","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-12-25T09:57:38.322677+00:00","firstPublish":"2022-11-11T22:34:15.475945+00:00","datePublished":"2022-12-25T09:57:38.294801+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"full featured ESP01 programmer/breakout board","likesCount":3,"makesCount":0,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":20,"displayCount":335,"filesCount":2,"privateCollectionsCount":0,"publicCollectionsCount":1,"pdfFilePath":"media/prints/315212/pdfs/315212-esp01-programmerbreakout-4e950956-644e-48be-bc33-c100e768c63b.pdf","commentCount":0,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"printer":null,"image":{"id":"1331251","filePath":"media/prints/315212/images/2731566_d9ae6c43-f3c1-4a51-a58c-0717d0af72d4/dsc_0479.jpg","rotation":0,"imageHash":"KzkONIKnp4h6h4ePhnRZh6BwCQ==","imageWidth":1024,"imageHeight":609,"__typename":"PrintImageType"},"images":[{"id":"1331251","filePath":"media/prints/315212/images/2731566_d9ae6c43-f3c1-4a51-a58c-0717d0af72d4/dsc_0479.jpg","rotation":0,"imageHash":"KzkONIKnp4h6h4ePhnRZh6BwCQ==","imageWidth":1024,"imageHeight":609,"__typename":"PrintImageType"},{"id":"1331298","filePath":"media/prints/315212/images/2731674_2308bca7-a132-441e-bf04-00d97deb390a/dsc_0478_3.jpg","rotation":0,"imageHash":"rSgOLISlmIl5iIiPdIg5iaCCCQ==","imageWidth":5984,"imageHeight":3366,"__typename":"PrintImageType"},{"id":"1331179","filePath":"media/prints/315212/images/2731409_8684f96e-84a8-41ac-9433-70d7b089a0d3/dsc_0477_3.jpg","rotation":0,"imageHash":"XggOHYKHmIeJiId/d2aIdWaHYGYH","imageWidth":1024,"imageHeight":687,"__typename":"PrintImageType"},{"id":"1331178","filePath":"media/prints/315212/images/2731410_2d90211f-3cbd-4ea1-a2dd-c271914128a6/dsc_0476_3.jpg","rotation":0,"imageHash":"YBgSHIKYmIeIh3d/dnhZhsAVCg==","imageWidth":1024,"imageHeight":576,"__typename":"PrintImageType"},{"id":"1331167","filePath":"media/prints/315212/images/2731397_89c82ebe-3cc8-4a48-bb17-74ea9bd89a6e/programmer_front.jpg","rotation":0,"imageHash":"MQgODwDZlpfIV2hvk5mUiZh2CPuxsC8K","imageWidth":1500,"imageHeight":1500,"__typename":"PrintImageType"},{"id":"1331168","filePath":"media/prints/315212/images/2731394_f1bade5f-d95b-4ee3-bfd5-f8288c886aef/programmer_backside.jpg","rotation":0,"imageHash":"MQgaBwD4NomGeId5hoh3iHd4CAAAAAAA","imageWidth":1500,"imageHeight":1500,"__typename":"PrintImageType"},{"id":"1331169","filePath":"media/prints/315212/images/2731398_d681943f-123d-4935-8509-277c35b4a1ce/dsc_0475_3.jpg","rotation":0,"imageHash":"WwgGFIKky5lPg4qOZ2dv7Pi3/w==","imageWidth":5984,"imageHeight":3366,"__typename":"PrintImageType"},{"id":"1331170","filePath":"media/prints/315212/images/2731396_afbfb709-dd23-451c-b748-54f43421a7c9/dsc_0472_3.jpg","rotation":0,"imageHash":"7vcNDAL1h3inaIiYd4cJd5avtw==","imageWidth":3366,"imageHeight":5984,"__typename":"PrintImageType"},{"id":"1331171","filePath":"media/prints/315212/images/2731395_fe2d7a22-7ddd-448c-a3f6-7d400005074b/dsc_0473_3.jpg","rotation":0,"imageHash":"5vcFBICYyGd/d4aPhoMHdMGM9g==","imageWidth":5984,"imageHeight":3366,"__typename":"PrintImageType"},{"id":"1331172","filePath":"media/prints/315212/images/2731393_37b1a8a3-bb2b-4b2b-a149-38e119f58d61/dsc_0474_3.jpg","rotation":0,"imageHash":"6AcKDIKaiHeIiIdfdnlSeGCN9w==","imageWidth":5984,"imageHeight":3366,"__typename":"PrintImageType"}],"tags":[],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"1410333","filePreviewPath":"media/prints/315212/stls/2731387_3d89e125-b875-405b-9c1d-243b7be0c3e1/esp01_programmer_base_preview.png","__typename":"STLType"},"license":{"id":"4","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"__typename":"PrintType","user":{"id":"113164","handle":"Antimaterie","verified":false,"dateVerified":null,"publicUsername":"Antimaterie","avatarFilePath":"media/auth/avatars/ec/ecc75da7-7a23-40e0-ba6d-3020b2f26755.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"highlightedModels":{"models":[{"id":"1231060","name":"LidMate - a pot lid holder","slug":"lidmate-a-pot-lid-holder","ratingAvg":"0E-10","likesCount":41,"liked":null,"datePublished":"2025-04-11T09:19:40.286224+00:00","dateFeatured":null,"firstPublish":"2025-03-15T22:39:37.073298+00:00","downloadCount":80,"mmu":false,"category":{"id":"4","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"4","name":"Kitchen","nameEn":"Kitchen","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-04-11T09:19:40.306925+00:00","image":{"id":"4333671","filePath":"media/prints/32657ea4-0ca5-48c6-a366-e0311e4cef98/images/9472095_3f4dadee-3d24-4690-b23c-4ddd0489c39e_5afdac8f-6fd6-43ec-afdd-4b877b8ccbf6/pot.png","rotation":0,"imageHash":"4ygWDwSfeHh5h4h4h3iHeIeIJ8D3JH4P","imageWidth":1024,"imageHeight":1024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"113164","handle":"Antimaterie","verified":false,"dateVerified":null,"publicUsername":"Antimaterie","avatarFilePath":"media/auth/avatars/ec/ecc75da7-7a23-40e0-ba6d-3020b2f26755.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"153957","name":"Garden hose (gardena) to PET bottle adapter","slug":"garden-hose-gardena-to-pet-bottle-adapter","ratingAvg":"5.0000000000","likesCount":97,"liked":null,"datePublished":"2022-11-30T19:29:16.004871+00:00","dateFeatured":null,"firstPublish":"2022-03-23T08:14:21.241381+00:00","downloadCount":555,"mmu":false,"category":{"id":"53","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"53","name":"Outdoor & Garden","nameEn":"Outdoor & Garden","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-11-30T19:29:16.035676+00:00","image":{"id":"911954","filePath":"media/prints/153957/images/1838845_319b5668-a2f2-4b77-a167-e38c6aa1b61c/dsc_5345.jpg","rotation":0,"imageHash":"4YmCBIAGb2+Hd3aG93iIUHj1+Xl3mJd3CQ==","imageWidth":1404,"imageHeight":1024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"113164","handle":"Antimaterie","verified":false,"dateVerified":null,"publicUsername":"Antimaterie","avatarFilePath":"media/auth/avatars/ec/ecc75da7-7a23-40e0-ba6d-3020b2f26755.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":{"ranking":null,"competitionId":"60","__typename":"PrintLatestCompetitionResult"},"__typename":"PrintType"},{"id":"179090","name":"stackable beer crate for CR2032 and other button cells version 2","slug":"stackable-beer-crate-for-cr2032-and-other-button-c","ratingAvg":"4.8636363636","likesCount":147,"liked":null,"datePublished":"2025-01-06T12:51:51.031513+00:00","dateFeatured":null,"firstPublish":"2022-04-26T20:51:23.617527+00:00","downloadCount":702,"mmu":false,"category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-01-06T12:51:51.785201+00:00","image":{"id":"825365","filePath":"media/prints/179090/images/1675720_1195e51b-338a-48de-b6af-5d4709ed5fd2/dsc_5305.jpg","rotation":0,"imageHash":"G+gFLYr8R3gyjVRLg4llhPeZdq95","imageWidth":1385,"imageHeight":1024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"113164","handle":"Antimaterie","verified":false,"dateVerified":null,"publicUsername":"Antimaterie","avatarFilePath":"media/auth/avatars/ec/ecc75da7-7a23-40e0-ba6d-3020b2f26755.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"179184","name":"material reduced bottom for stackable beer crate","slug":"material-reduced-bottom-for-stackable-beer-crate","ratingAvg":"5.0000000000","likesCount":90,"liked":null,"datePublished":"2022-12-27T21:17:32.550528+00:00","dateFeatured":null,"firstPublish":"2022-04-27T00:34:45.199525+00:00","downloadCount":457,"mmu":false,"category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-12-27T21:17:32.575785+00:00","image":{"id":"833492","filePath":"media/prints/179184/images/1693015_a904ae6c-57df-44dc-b159-a62b9b8917fe/20220429_121608.jpg","rotation":0,"imageHash":"2CkGJYJ/amh2hXeQd2eHhDmFoBAJ","imageWidth":1024,"imageHeight":732,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"113164","handle":"Antimaterie","verified":false,"dateVerified":null,"publicUsername":"Antimaterie","avatarFilePath":"media/auth/avatars/ec/ecc75da7-7a23-40e0-ba6d-3020b2f26755.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"166953","name":"french cleat square holder (v2)","slug":"french-cleat-square-holder-v2","ratingAvg":"4.4000000000","likesCount":77,"liked":null,"datePublished":"2024-01-06T18:59:02.712437+00:00","dateFeatured":null,"firstPublish":"2022-04-10T13:35:52.190269+00:00","downloadCount":448,"mmu":false,"category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-01-06T18:59:02.733554+00:00","image":{"id":"2608934","filePath":"media/prints/166953/images/5565356_d12747c7-197e-4adf-b6ef-eb71a4841c0f_a2f8d616-43da-4654-bcf9-5b20263fd146/img_20240106_164633_0.jpg","rotation":0,"imageHash":"2GgGFoZ9hzSwiXaNWpdpqHiHGOiwcQo=","imageWidth":1165,"imageHeight":1024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"113164","handle":"Antimaterie","verified":false,"dateVerified":null,"publicUsername":"Antimaterie","avatarFilePath":"media/auth/avatars/ec/ecc75da7-7a23-40e0-ba6d-3020b2f26755.jpg","badgesProfileLevel":{"profileLevel":24,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"}],"featured":true,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":false,"membership":null},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}

ESP01 programmer/breakout

Model files

esp01_programmer_base.stl

esp01_programmer_base.stl

esp01_programmer_lid.stl

esp01_programmer_lid.stl

Model origin

License