SPACE CASE: Mini-ITX SFF computer case

Project files and instructions: https://github.com/CircleTect/space-case

This project is:

• A case that you can make at home with nearly any consumer 3d printer (designed for a Prusa Mini)
• Very easy to build in and mod
• Open source, so you can edit the original design files

Features:

• Full length 4-slot GPU support up to 330mm long
• Riser-card free design (reduces compatibility issues and cost)
• Up to 280mm radiator support
• CPU cooler height up to 149mm (if using side panels)
• SFX PSU support (ATX possible with mod)
• 1 x 3.5" HDD support or 3 x 2.5" drive support
• GPU and mobo I/O egress from base of the case
• Optional I/O panel at the top of the case
• It has a handle, just because
• 16.7 litres. Not the smallest, but good for ease of building in, mod-ability, and requiring no riser card
   

Project files and instructions: https://github.com/CircleTect/space-case