*Fixed the weird STL file for the base. Fix in slicer shown below in screen shot.
We've all had the games when a certain die just doesn't come up the way the need to. This is a simple dice jail to separate the die from the others and let the die see it's brothers and sisters rolling as it should be. Some nights there just isn't room for anymore…..
Models placed in simple printing position.
I have only printed this on the Phrozen Mini 8K in the position that they are uploaded. If printing in resin, be sure to rinse the print in position hinge very well prior to finalizing curing. Also, let dry for a day or so. It also works best to ‘exercise’ the hinge part way through curing. It will fuse if not exercised… that is for certain.
I printed a test of the hinge on a Raise3D E2 with good results at 0.2mm layer height, but not the entire model.
The author marked this model as their own original creation.